GET TECHNICAL SUPPORT FOR 123.HP.COM/SETUP 6968 PRINTER

  • HP AIRPRINT SETUP
  • HP CLOUD PRINT SETUP
  • HP EPRINT SETUP
  • HP PRINTER WINDOWS 10 SUPPORT

 123 HP OFFICEJET PRO 6968 PRINTER SETUP AND INSTALLATION

Unpack the printer 123.hp.com/ojpro6968 from its packaging and hold the power cords ready to attach at their respective locations. Now place the cords securely in the wall sockets so that the machines do not have loose connections or other power issues. When the cords are attached, push the Home button in the printer’s left corner.

How to set up the printer?

  • If you first turn the printer on, it can make a little bit of noise.
  • Using the arrows next to the printer’s control panel to select the language, country, and area while viewing the home screen. Now, hit the Ok button.
  • The printer screen will now match the ink cartridges when you insert them.
  • Using cutouts at the sides of your printer to remove the cover of the ink cartridge.
  • Check at the mark on the cartridge’s back cover, and first insert the tri-color cartridge.
  • Remove the protective tape that protects the ink nozzles and electrical contacts. (NOTE: The color of the locking levers will correspond to the color shown on the cartridges).
  • Slide the ink cartridges into their respective slots slowly and move them into place before they locks.
  • Using the same method even for mounting the black cartridge.
  • Once the original HP cartridges are finished installing, a message box appears on the Control Panel. Tap OK
  • Load the paper stack onto the input table. Now, an alignment sheet is printed on the printer.
  • Scan it by placing the speed print side down on the scanner glass after the alignment page is scanned.
  • When the alignment page is scanned a message box will appear on the control panel of the printer that reads, ‘Alignment good.’ Click Ok button to continue.
  • Users are now permitted to wirelessly link the printer to a network, or to Ethernet or USB.

Upon completion of the simple setup, install the printer program by visiting 123.hp.com or by inserting the CD that came with the printer. Follow on-screen instructions to complete the process of installing the printer. Using the website link to download the driver program 123.hp.com/ojpro6968 or 123.hp.com/setup 6968.

 123 HP SETUP OJPRO6968 PRINTER SERVICE

How to print from iPhone?

We had spoken earlier about printing through the AirPrint app. For any built-in app solution for iOSdevices , users can print images, papers, emails or other web pages from their iPhone.

  • Make sure that the wireless icon is turned on before beginning the print job, and that your HP OfficeJet Pro 6968 printer is linked to a wireless network.
  • Open your iPhone’s Wi-Fi settings and check for access to the same wireless network link as your HP OfficeJet Pro 6968 printer.
  • It should be noted that AiPrint is not capable of supporting public wireless networks such as cellular data links (3 G or 4 G), Wifi, and hotspots.
  • Go to the App store and download any of your iPhone’s compatible printer devices. Now, the button.
  • Tap the Sharing button of the app, and click the print icon.
  • Come to the home screen and open the text , image, email or web page you ‘d like to print and then pick the Sharing icon. (Otherwise, press Menu button and then tap Print option.)
  • Tap on Print option after selecting the specific file.
  • You’ll be navigated to the Printer Options screen where you need to pick a printer.
  • Choose the printer every you want to use.
  • Adjust any print settings, decide how many copies to print and then tap Print choice to get the print job finished.

When the printer finishes the printing process, you can access the documents or images by double-clicking your iPhone’s Home button. Go to Print Center and pick the document that was recently printed.

Choose the following link to download the driver program

123.hp.com/ojpro6968 or 123.hp.com/setup 6968 or just press the download button below.

You can also download the user guide or manual from the 123.hp.com/ojpro6968 or 123.hp.com/setup 6968 link below, or just click the download button.

How to cancel the print job?

When you want to stop writing, use your smartphone, you can do it in a jiffy.

  • Click the iPhone’s Home button twice.
  • The available and working apps will show up on the phone.
  • Pick Print Center now and tap on it.

Upon opening the Print Center app, press Cancel Printing option to stop the print job.

123 HP OFFICEJET PRO 6970 WIRELESS INSTALLATIONS

Using HP direct wireless, users can print wirelessly from smartphones,tablets, computers or other wireless-enabled devices – without even connecting to an existing wireless network.

The Wireless Setup Wizard helps you to control the wireless link to your printer.

  • Click the Wireless button on the control panel on the printer.
  • Select the print settings tab next to it.
  • Use the Wireless Setup Wizard to navigate to OK. Now the wizard must check the list of networks available.
  • Check if there is a name for your network. When not, users should manually sign in to the network.
  • Scroll to enter new name of network and then press OK.
  • Enter the name and then tap OK.
  • Recall WEP or WPA key when asked.
  • Tap to check in OK. The printer is now trying to connect to the Network.

How to connect a new printer?

  • Depending on the operating system you are using execute one of the following.
    • Windows 8: Begin – – – > App bar – – – > All Applications – – – > Printer-name tab.
    • Windows 7 , Windows Vista and Windows XP: Begin – – – > All the programs – – > HP – – > Printer folder – – > Printer name.
  • Use Computer and Printer Setup.
  • Select Connect a new printer from the options list, and follow the instructions shown on the screen.

How to change network settings?

  1. Drag the Wireless button on home screen of the printer.
  2. Pick Settings, and Advanced Settings.
  3. Make the improvements to the Advanced Settings menu that you like.
  4. Now follow the prompts on-screen to change settings.

How to change from a USB connection to a wireless network?

  • Depending on the operating system you are using execute one of the following.
    • Windows 8: Begin – – – > App bar – – – > All Applications – – – > Printer-name tab.
    • Windows 7 , Windows Vista and Windows XP: Begin – – – > All the programs – – > HP – – > Printer folder – – > Printer name.
  • Select a Setup & Computer Printer.
  • Click Switch a Wireless USB wired printer.

123 HP OFFICEJET PRO 6970 PRINTER WI-FI PROTECTED SETUP

REQUIREMENTS

  • A 802.11 / b / g / n wireless network that includes an access point or router with WPS enabled.
  • A computer or laptop with Wi-Fi or NIC (network interface card).
  • You will link your computer or laptop to the wireless network through which the printer is attached.

Vice PUSH BUTTON (PBS)

  • To start the WPS button, press and hold the Wireless button onto the print for a few seconds. Now the wireless light starts to blink.
  • Now click on your router’s WPS (Wi-Fi Protected Setup) button.
  • The printer will take a few minutes to get the wireless link built.

PIN METHOD

  • Press Wireless button on the control panel to view the men.
  • Stay until the printer finishes the tak and then push the Wireless button if you see the printer in error or perform a task.
  • Choose Settings from the control panel display screen on the printer.
  • Now touch Protected Setup Wi-Fi from the list of available choices.
  • If on the wireless router you have a Push button, then press the Push button and follow the instructions.
  • If not, pick PIN, and then obey on-screen prompts.

How to connect wirelessly to the printer without a router?

  • Switch on the Wireless directly from the control panel of the printer.
    • Click the Wireless Direct button on home screen of the printer.
    • If the option for Wireless Direct is Off pick Settings.
    • Go again to Wireless Direct, select either ON (No Security) or ON (With Security).
  • When the Wireless Direct is turned on, find the main wireless and your password.
    • Tap the main Wireless button on the home screen of the printer.
    • Select Display Name to display a direct name for the wireless.
    • Pick View Password to reveal your password.
  • Turn over your machine or mobile device to the wireless link.
  • Look for the printer you like, and then attach it to the direct name of the wireless.
  • Input the Wireless Direct password when necessary.

Try to print a text or a picture from your device or smartphone.

 123 HP SETUP 6968 MOBILE PRINTING SOLUTIONS

Remote printing makes the job easy for you. Using your 123 HP OfficeJet Pro 6968 printer you can print any document or photo store on your laptop and print it out.

NOTE: You can connect your mobile device and a printer to the same network as your machine.

APPLE:

  • Pick the picture or document from your Apple phone you want to print, and then press the Sharing button.
  • To check the Print button, swipe over the screen. Click upon it as you find it.
  • Choose the printer you want to use, and make the required print setting adjustments.
  • When you have made the changes, select Print to start the print job

ANDROID:

  • Open the Google Play Store, and check whether or not HP Print Service Plugin has been installed.
  • If not, have the plugin mounted. Allow this after the plugin has been installed.
  • Switch the setting to On, and print your mobile app.
  • Open the document or photo you wish to print, then press the Menu button at the right corner of the page.
  • Select the printer you like, and press the down arrow to change the print settings.
  • Now, confirm the settings on the printer and print. To start printing choose the Print icon.

GOOGLE CHROME

  • Click Ctrl+P to open the Print dialog box from the Chrome browser or compatible Google Cloud print apps.
  • To change printer, press Switch.
  • Pick the printer you wish to use from the list of choices.
  • Allow the print settings changes, and then press Print.

WINDOWS:

  • Select the document you want to print, and click on the Devices menu on the right side of the device.
  • Ensure your printer links to a wireless network. If not, to load the built-in driver for the printer, you must perform a one-time Add a Printer.
  • Pick the printer you want to use, and change the print settings.
  • Tap Print, and enjoy printing afterwards.

AMAZON:

  • Ensure your Amazon computer has MobiSystems Office Suite App enabled.
  • Pick the document you want to print from the app and then tap Print choice
  • Adjust the print settings as needed and then select Print.
  • Confirm the print settings and the printer, and then press Print to start the print job.

 PRINT FROM A WIRELESS-CAPABLE COMPUTER

How to print from a wireless-capable computer (Windows)?

  • Ensure you turn the HP Wireless Direct option on.
  • Now you need to switch the Wi-Fi connection on your HP ojpro6970 printer on.
  • Link to a new network from your computer just as you normally do.
  • Select the wireless network you would be connecting to. (NOTE: Choose the printer name that will be mentioned as Hp-Print0**-ENVY XXXX.)
  • Type in the network protection code when asked.
  • Unless your printer has a USB link to the network then do the following.
    • Do the following according to the operating system you are using
      • Windows 8: Begin – – > bar – – > All Applications – – – > Name of the Printer – – > Utilities.
      • Windows 7 , Windows Vista and Windows XP: Start – – – > All the applications – – > HP – – > Printer Directory.
  • Select Setup & Program for Printer, and then press Connect a new printer.
  • Pick Wireless choice in the dialog box on Connection Options. From the list shown, select the program for HP printers.
  • Now, to complete the process follow the on-screen instructions.

 How to print from a wireless-capable computer (OS X)?

  • Make sure your direct Wireless HP is turned on.
  • Switch AirPort on.
  • Pick the HP wireless direct name that is described as HP-Print-**-ENVY XXXX when you click on the AirPort icon.)
  • Use an HP printer.
    • Use Print & Fax or Print & Scan under the System Preferences line, depending on the operating system you are using.
    • Select the symbol + (plus) at the left corner where the printers are mentioned.
    • Tap the printer you ‘d like to use, and press Connect.

 HP Officejet Pro 6968 Printer Troubleshooting

When the printer is not printing (nothing prints)

  • When print jobs are trapped in the queue of prints, then cancel all documents in the queue and reboot the machine. After the reboot process is completed, try printing a file.
  • If your printer turns off when printing, an warning message on your computer screen will pop up. If it doesn’t, then there is a problem you’ve built in the HP app. Deinstall and reinstall the software to avoid further problems.
  • Checking if all cable links are safe and stable is also a must. If there is a loose link replace it with a new cable.
  • If the Wireless icon’s blue light isn’t flickering, then you need to check the wireless connection of your printer. Attempt to print a Wireless Check Report to diagnose and troubleshoot your printer problems.
  • Check if your computer’s firewall program is impeding contact between your machine and printer. In that case, temporarily disable the firewall, and proceed with the print job. When you have completed printing the pages, click on the firewall.
  • If after performing the above steps your 123.hp.com/ojpro6970 printer still does not respond, then try restarting both the machine and the printer.

If something is missing on the page or is incorrect

  • Check the length of the usb cable and the location of the printer. Sometimes the high USB-generated electromagnetic fields can cause minor distortions and ruin the printout image.
  • Move your HP printer away from the electromagnetic field in that situation.
  • It is recommended that you use a less than 3 meter long cable to mitigate the impact of the electromagnetic field.

Disclaimer:

https://123-hpsetup.net is an independent service provider that offers some helpful information for HP Printers. The copyright information is solely ensured for just data reference. We don’t pursue any certifications regarding this. The use of trademarks and names is only for reference purposes.