123.hp.com/setup 6830 – 123 hp com ojpro6830 Printer Installation

The HP OfficeJet Pro 6830 is an inkjet all-in-one printer. It is a nutshell full with compactness and versatility. Low print prices, high speeds of printing, clean quality of production and a highly sensitive touch screen make it the perfect option for small offices. The HP OfficeJet Pro 6830 also supports AirPrint and other wireless and mobile-printing facilities. Using 123.hp.com/setup 6830 or 123.hp.com/ojpro6830 to download device drivers for this printer. Specifications for the OfficeJet Pro 6830 are given below.

  • Connectivity: USB 2.0 port, Wifi,
  • Wi-Fi, easy wifi
  • Mobile Printing: ePrint, AirPrint, Mopria, HP Plug-in Print System, HP Smart App.
  • Fast Ink: Yes
  • Scan (B/W): 20 ppm
  • Print speed: 11 ppm (colour)
  • Output tray paper (A4 sheets): 225 sheets
  • Data Feeder automatic: 35 sheets
  • Input Paper Tray (A4 sheets): 60 sheets
  • Read on to find out how to customize your HP OfficeJet Pro 6830 printer.

123.hp.com/ojpro6830-Setup of HP Printer

123 HP OfficeJet Pro 6830 Unboxing

  • Next, remove the printer box installation CD, manuals, power cords, and fax cords.
  • The Installation CD includes the Mac OS X and Windows device driver. You can also download the 123.hp.com/setup 6830 or 123.hp.com/ojpro6830 device driver
  • Then turn the cardboard box and carefully lay it on the top of the printer. Drag the printer out of the press box now.
  • Now remove the Styrofoam caps on either side of the printer, and slip them out of the printer ‘s clear cover.
  • Last, peel off the printer surface with the blue tapes and clear films.
  • Open the access area of the ink cartridge using the cutouts on the sides, and search there for packaging materials.
  • After the packaging materials are removed from the entry area for the ink cartridge, close the lid of the ink cartridge.
  • Then open the glass lid to the scanner. Remove the sheet of Styrofoam and reclose the lid.
  • Eventually, open the front of the Paper Tray and remove the cassettes.
  • Drag away the paper width guides and cover the tray.
  • Here is how to unbox your 6830 HP OfficeJet printer. The next move is to turn on your printer and perform its simple initialization.

123 HP OfficeJet Pro 6830 Initializing Printer

This portion is composed of two stages:

  1. Turn the printer on.
  2. Initialization of the Printer.

Follow the steps below to turn on your printer and configure it

  1. Take the power cord which you previously held aside.
  2. Instead, attach one end to the printer ‘s rear and the power cord’s other end to the wall outlet.
  1. Eventually, the power button is pressed to turn the printer on.
  2. First, scroll through the list and select the language you want.
  1. Tap Confirm then to confirm your choice of language.
  2. Likewise, select the place your printer is located in.
  3. Again tap Check to check the location of your printer.

First, your all-in-one HP OfficeJet 6830 printer asks you to choose between doing a product tour and continuing the setup process. To load the ink cartridges, press Continue the program drivers can be installed at 123.hp.com/setup 6830 or 123.hp.com/ojpro6830

HP OfficeJet Pro 6830 Software Driver Installation

You can play the small animation provided by your HP Printer to mount the ink cartridges, or follow the steps below:

  • Next, you open the access area for the ink cartridge.
  • Instead, remove the transparent cover on the cartridge box. The setup kit includes four cartridges.
  • Afterwards remove the orange pull tab on the black cartridge contacts.
  • Now turn the cartridge around and in the counter-clockwise direction pull the orange cap away to detach it.
  • First, put the cartridge into its corresponding color slot.
  • Similarly put the other cartridges into the remaining slots.
  • It is the first phase during the 123.hp.com/setup 6830 or 123.hp.com/ojpro6830 drivers update

123.hp.com/setup 6830-HP Wireless Setup Wizard

Find out how to connect your HP OfficeJet Pro 6830 to Wi-Fi, so that you can install the device drivers from 123.hp.com/setup 6830

  • If you haven’t been taken to home screen already, swipe down.
  • Click the button on Wireless.
  • Click the Wireless button, and the Wireless Setup Wizard afterwards.
  • Your OfficeJet Pro 6830 then checks for available networks in the surroundings and then shows a chart on the control panel.
  • Choose the wireless network you want to connect to, and tap its name.
  • Create the wireless network password using correct case letters.
  • The printer is attempting to connect to the grid.
  • When the printer connects successfully to the internet, a Connection Successful message is shown on the screen.

The device drivers are now available for download and update from 123.hp.com/setup 6830

123 HP OfficeJet Pro 6830 Alignment Printer

  • Next, slide the Paper Tray out and extend the Input Tray.
  • Then place on a hard surface some simple sheets, and drop the stack into the input tray.
  • First, close the Input Tray and wait for the printer to detect installation of the documents.
  • To confirm that the papers were loaded, tap OK.
  • Wait until the printer has an alignment sheet printed out.
  • Put the sheet print side down on the scanner glass and open the scanner cover.
  • Close the lid to scan the alignment tab, and tap Search.
  • When the alignment cycle is complete, an Alignment Successful message is shown on screen by the printer.

You can download the device driver after downloading the Wireless Setup Wizard from 123.hp.com/setup 6830 or 123.hp.com/ojpro6830

 HP OfficeJet Pro 6830 Software Driver Installation

  • Turn the machine on.
  • Then make sure your printer is wired to the same wireless network.
  • Instead, open any tab and go to 6830 123.hp.com/setup
  • In the search box type your printer name and your printer model number.
  • The name and model number of your printer is given on the right hand side.
  • Once the printer name and model number is entered, press Search.
  • Tap Install the device drivers to install to your printer.
  • When the update is complete, the app can be accessed from the update bar on the browser.
  • Read and adhere to HP’s terms and conditions after opening the HP Easy Start Utility program.
  • Instead HP shows a list of the applications to be installed on the computer.
  • You may also use the Customize App Collection button to customize the Program.
  • Then follow the on-screen instructions to complete the installation process.
  • This completes downloading and installation of the 123.hp.com/setup 6830 device drivers

123 HP OfficeJet Pro 6830 ePrint service

Should you have to print a paper when you’re away from home? No issue. Just use the HP ePrint service to submit your paper to the printer in order to print it out. The best part is that no additional drivers are needed other than the ones downloaded from 123.hp.com/setup 6830 or 123.hp.com/ojpro6830.

Follow the steps below to install your HP OfficeJet Pro 6830 Web Services and ePrint

  • If the dashboard is not available, swipe the tab down to open it.
  • Then click the button on Setup.
  • Tap Accept on the next page to agree to the terms and conditions.
  • Now let the printer load updates automatically by tapping on OK.
  • Now it’s printed a printer information sheet.
  • To complete Web Services follow the instructions displayed on the control panel.
  • Then open your machine with an e-mail program.
  • Next, enter an e-mail address for your printer in the To field.
  • Make sure you left the empty Cc-field.
  • Then add the printed papers, and click Submit.

Once your printer is turned on and connected to the internet, it will print the document out.

123 HP OfficeJet Pro 6830 Scanning Process

Follow the steps below to learn how to use your HP OfficeJet Pro 6830 All-in-one printer to scan documents to your machine and email.

  • Next, go to segment on the Scan.
  • Then pick Machine Handle Search.
  • Select Activate to allow scanning.
  • First, open the glass lid for the printer and put the print side down on the glass lid for the printer.
  • Now, open the HP Print App, and press Scan a Picture or File.
  • Select Save Report as a PDF file to save the sample as a PDF.
  • To save the scan as JPEG file, pick Save the document as JPEG,

Install and install the device drivers for scanning documents into your printer from 123.hp.com/setup 6830 or 123.hp.com/ojpro6830.

123 HP OfficeJet Pro 6830 Faxing Process

You can learn how to submit a fax with your HP OfficeJet Pro 6830, in this segment.

  • Open the glass cover of the scanner on your printer.
  • Place the document to be faxed down on the glass lid of the scanner, and close the glass lid of the scanner.
  • Instead pick Fax from printer’s display screen,
  • Then input the fax number using the telephone book or use the keypad.
  • Finally, by clicking on the respective choice choose between Black and Colour.

The fax is then forwarded to the recipient. You would have downloaded the full function program from 123.hp.com/setup 6830 or 123.hp.com/ojpro6830 to allow use of the scanning features.


https://123-hpsetup.net is an independent service provider that offers some helpful information for HP Printers. The copyright information is solely ensured for just data reference. We don’t pursue any certifications regarding this. The use of trademarks and names is only for reference purposes.